-
How do I get a copy of the plat of survey map of my property?
Call the Engineering Department at 414-425-7510 for a copy. There is a fee of $.70 for the first copy and $.15 for every other copy.
-
How do I get my lot line stakes located?
Please fill out the Waiver for Lot Pipe Locate form and either email it to Marcia Lapointe in Engineering or mail or drop it off at the Engineering Department at Franklin City Hall, 9229 W. Loomis Road, Franklin. All waivers will be reviewed by Engineering Staff who will recommend appropriate or further action by the Department.
Pipe Locates are being reviewed on a case-by-case basis only as to protect the City from any liability that may be incurred.
-
How do I request a stop sign or other sign at a location?
A written request addressed to the Board of Public Works is requested. The item will then be placed on the Board of Public Works agenda and you will be notified of the day and time.
Each type of sign must meet specific criteria to be placed on the City's streets, therefore, the approval process is lengthy but necessary.
-
How do I find out an address if it is a new subdivision?
Call the Engineering Department at 414-425-7510 and ask for Marcia for any information regarding addresses.
-
Who do I notify of concerns regarding street trees, overgrown grass, or weeds?
For questions regarding street trees, please call the Public Works Department at 414-425-2592.
For complaints regarding overgrown grass or weeds, please call the Clerk's Office at 414-425-7500.
-
Who do I contact regarding culverts or ditch enclosures?
Call the Engineering Department at 414-425-7510 and ask for Assistant City Engineer Ron Romeis for this information.
-
Where do I get information regarding Fill and Soil Disturbing Permits?
Call the Engineering Department at 414-425-7510.
-
Where do I get information on Water or Sewer As-Builts?
Call 414-425-7510 or come into the Engineering Department and staff will direct you to the right as-built information for your needs.
-
Where can I purchase a City map?
City Maps are available in the Engineering Department in two sizes. The small map is $3.50 and the large map is $10.
-
Where do I get information on curb cuts?
Curb cut information can be obtained in the Engineering Department (414-425-7510). Inspections for curb cuts are made directly through the Inspection Department at 414-425-0084.
-
Is sanitary sewer or water main going in my area?
Call the Engineering Department at 414-425-7510 and ask for one of the Engineers.
-
How do I get the Official Notice to Bidders List for a certain project?
Call the City Clerk's Office at 414-425-7500 or the engineering firm listed for a copy of the Bidder's List.